through pendent pushbutton station
(Optional Remote or Cabin Operated)
Best Product In Market
These cranes are available in single girder type or double girder type as well as EOT Cranes but these cranes are run on floor mounted rail by its two legs which is fabricated from steel section or plates, Our Robust gantry crane which save your expensive structure cost, easily expandable long travel whenever you need you may expand longitudinal travel with low cost compare to EOT,no need of heavy structure and foundations, easily disassembly and transfer ay anywhere, useful for temporary light or heavy work. 3t. to 100t. Cap., up to 55-meter span Double Girder type and required Height of lift (Higher Capacity and span also available on request).
Details About Gantry Crane
It is also a type of overhead crane that comes with a single and double girder configuration. The Gantry Crane is always supported by legs and move on the wheels. It is mainly applied or found to be applied on the rail or track system. These types of cranes are mainly applied and used for outdoor applications. Most of the outdoor applications or heavy industrial works are carried out with the help of gantry cranes. These types of Cranes are generally used outdoor to handle heavy loads. In the engineering Industries, Ship yards, Ports, Granite, Steel Yards, Cement Pipe Industries, Open Yard, Storages places, Container Depot etc.
These cranes are available in single girder type or double girder type, as well as EOT Cranes but these cranes, are run on the floor-mounted rail by its two legs which are fabricated from steel section or plates, these cranes are specially designed for outdoor working.
These types of Cranes are generally used outdoor to handle heavy loads. In the engineering Industries, Ship yards, Ports, Granite, Steel Yards, Cement Pipe Industries, Open Yard, Storages places, Container Depot, etc. These cranes are available in single girder type or double girder type as well as EOT Cranes but these cranes are run on the floor-mounted rail by its two legs which are fabricated from steel section or plates, these cranes are specially designed for outdoor working.We design and manufacture Double Girder EOT Crane as per Indian Standard IS; 807, & IS 3177.
Other Details of the Gantry Crane
All Details of Gantry Crane are given below:
- Simple and optimum Design ensuring minimum dead weight,Wheel Load Headroom and easy to maintenance
- Easy to installation
- Reliable structure
- Higher efficiency to save power
- All motions are protected with Fail safe type brakes (which are applied when power supply is off and release when power supply is on.)
- All motions are protected with limit switches
- Rubber buffers are provided to extra protection against collision in case of limit switch failure
- Dustproof panel box with reputed make switch gear or as per customer’s approval
- 110 V Control voltage selected for protection of Crane operator against any electrical shock
- With electrical Interlocking to prevent simultaneous operation of opposite motion
- Using “C’ Rail / | Section type C.T. & Push button Festoon system it’s give long life and trouble free operation
- Unbreakable, Handy, light weight PVC Push button
- Coupling less L.T. & C.T. & Hoist Motion up to 10 Hp,(Less mechanism less maintenance)
- VFD in Long Travel Motion, Smooth Start & Stop (Maximize the life of Mechanism)
- Own Make Gearbox so which are easy to maintenance and we can provide any parts at any time from our stock
- Platform with hand railing for easy, simple & safe maintenance of the crane extended partially or totally along the girder width
