through pendent pushbutton station
(Optional remote or cabin Operated)
What is a single girder crane?
The single girder crane features a single bridge girder, two different end trucks on both the sides and a trolley hoist that runs alongside the bottom flange of the single bridge girder between both the end trucks. One of the greatest advantages of this crane is that it enables a direct transfer of the hoist trolley which lies between the suspension monorail and the crane. The flexible ball and socket connection between the carriages and the crane girder allows the single girder crane to work even on the tracks which are not parallel. We, the Single Girder Crane Suppliers provide you with a wide range of different single girder cranes depending on your needs.
Working principle of the single girder cranes
The working principle of the single girder cranes is as follows:
- Control Method: The remote control or the room control avoids any sorts of injury to the staff operating it.
- Emergency Brake: In case the staff operating the crane comes across any kind of an emergency, the emergency brake system can be started which would also protect the related treasures.
- Overload Protection: In case the material is more than the capacity, the crane gives a warning which protects itself.
- Main Lifting Motor: The main lifting motor features currency protection and thermal protection.
We are one of the most reputed Single Girder Crane Manufacturers In India and our cranes provide you with all these features and many more!
Other Details of the Single Girder EOT Cranes
All Details of Single Girder Top Running crane are given below:
- 1t. to 10t. Cap., up to 50-meter span and required Height of lift (for Higher Capacity and span please consult us)
- 1t. Cap. Single Beam EOT Crane
- 2t. Cap. Single Beam EOT Crane
- 3t. Cap. Single Beam EOT Crane
- 5t. Cap. Single Beam EOT Crane
- 7.5t. Cap. Single Beam EOT Crane
- 10t. Cap. Single Beam EOT Crane
Area
Non Hazardous/Hazardous as per customer requirement
Test Load
125% of SWL
IS Code
IS807, IS3177
Type
Single Girder
Locations
Indoor/Out door
End Carriages
The End Carriages are welded construction type and fabricated from plates or Std. section type constructions.
Bridge Girders
The girder is of plate fabricated box type construction design to sustain all stresses arising due to vertical & lateral forces with impact to which they are subjected. The maximum deflection of the main girder is limited to 1/750 the span of live loads including the weight of the trolley or hoist.
Platform
Two small length platform shall be provided
End Stopper
Steel end stoppers are provided on either side of the bring to limit the motion of the trolley. All the buffers will employ springs for shack absorption.
Steel
Steel confirming to IS-2062 or equivalent is used in the manufacturing of the main load bearing. (Mainly Essar or Sail make)
Wheel Base
As per span and IS code
L.T. Drive System
Twin drive type
Main-Hoisting
3.5 meter per minute (micro speed will be provided on demand)
L.T.
20 meters per minute (micro speed will be provided on demand)
C.T.
15 meters per minute (micro speed will be provided on demand)
Ele. Motors
All motors are off S-4 duty, Squirrel cage ,40% CDF,150 S/hr., IP -55 with Class F insulation or as per required class and duty
Brakes
Electro Hydraulic shoe type/ Electromagnetic Disc / Electromagnetic Shoe type brake shall be provided in Hoisting L.T. & C.T. These brakes are automatically released when the motor circuit is on and is applied the motor circuit is off
Wire Rope & No. ofaal
Selected as per crane capacity and IS Code he make of wire rope will be used Usha-martin
- Simple and optimum Design ensuring minimum dead weight, Wheel Load Headroom and easy to maintenance
- Easy to installation
- Reliable structure
- Higher efficiency to save power
- All motions are protected with Fail safe type brakes (which are applied when power supply is off and release when power supply is on.)
- All motions are protected with limit switches
- Rubber buffers are provided to extra protection against collision in case of limit switch failure
- Dustproof panel box with reputed make switch gear or as per customer’s approval
- 110 V Control voltage selected for protection of Crane operator against any electrical shock
- With electrical Interlocking to prevent simultaneous operation of opposite motion
- Using “C’ Rail / I Section type C.T. & Push button Festoon system it’s give long life and trouble free operation
- Unbreakable, Handy, light weight PVC Pushbutton
- Coupling less L.T. & C.T. Motion up to 7.5 Hp, (Less mechanism less maintenance)
- VFD in Long Travel Motion, Smooth Start & Stop (Maximize the life of Mechanism)
- Own Make Gearbox so which are easy to maintenance and we can provide any parts at any time from our stock
- Platform with hand railing for easy, simple & safe maintenance of the crane extended partially or totally along the girder width
- Radio Remote Control / Cabin Control
- Dual speed for all motion
- VFD in all motion
- Siren While Traveling a crane
- Load Cell with Display to weigh a Load or protection against overload
- Special Dimension Hook
- Other Reputed Brand Gearbox
- Drag Chain in Festoon system
- Protective Paints / Coating
- Over Lowering or over hoisting prevention limit switch
- Hook Safety Latch
- Overload Relays
- Travelling limit switch
- Rubber buffer
- Brakes in Hoisting as well as c.t & L.T.
- Main Switch
- On/ off switch in push button /Emergency stop
- MCB /fuse
- All 4 core cables with Earth cable
- Maintenance platform
- Siren in goliath crane
- Anti-collision device when more than one crane on same bay
Electric & Small parts are packed by high quality wooden crate to reduce distortion in conveying; Main beams, end carriages and electric hoist are packed by Wrapping of plastic roll It can reduce abrasion when transport.
- One to one service guarantees you the best purchasing experience.
- Strong production capacity and professional workmen guarantee you the short delivery.
- Strict delivery inspection guarantees you the high quality products.
- The short delivery time.
- One year warranty for Cranes
- Providing free quick-wear part
- Low charge for continue maintenance when warranty is expired
- Exclusive engineer support at any time.
- Highly professional training to end-users