through pendent pushbutton station
(Optional remote or cabin Operated)
Single Girder EOT Crane Manufacturers & Suppliers in India
Material handling is crucial when it comes to the manufacturing industry such as Single Girder EOT Crane because it involves the movement of materials from one place to the other. This bulk movement often changes the nature of the materials to be transported. However, material handling is one of the most attractive and major areas in which the cost is reduced. When laborers are employed to move bulk materials, the cost is involved and is not much safe for them as well. But if the costs are reduced it leads to a lesser cost for the finished products.
Single Girder EOT (Electric Overhead Traveling) Crane is mostly suitable for up to 10t. Cap., small span and class-I & II, a duty it is consist of standard Sections fabricated or box type plate fabricated beam, wheels, Gearboxes, motors, and running overhead to lifts materials and run both axes. We are reliable as Single Girder EOT Crane Suppliers In India. Our Single Beam EOT Cranes are Design & manufacturing as per IS: 807, IS: 3177.
This crane is also known as Single Beam Crane, Single Beam EOT Crane, Single Bridge Crane, Monorail Crane, Electric Crane, EOT Crane,Electric operated crane, Single Girder Overhead Crane.
What does Single Girder EOT Crane do?
EOT or Electronic Overhead Travelling crane is important industrial equipment that is used in the material handling job. The Single Girder EOT Cranes are used in lifting the objects through a hoist which is fitted in a trolley. Being the Single Girder EOT Crane Manufacturers, we have different kinds of these standard cranes depending on your needs. They cost much less in different ways and are quicker to install. They can also be controlled with the help of radio remote controls. Even independent traveling push button pendants that allow the operator to be all safe and operate.
Other Details of the Single Girder EOT Cranes
All Details of Single Girder EOT Cranes are given below:
- 1t. to 10t. Cap., up to 50-meter span and required Height of lift (for Higher Capacity and span please consult us)
- 1t. Cap. Single Beam EOT Crane
- 2t. Cap. Single Beam EOT Crane
- 3t. Cap. Single Beam EOT Crane
- 5t. Cap. Single Beam EOT Crane
- 7.5t. Cap. Single Beam EOT Crane
- 10t. Cap. Single Beam EOT Crane
Area
Non Hazardous/Hazardous as per customer requirement
Test Load
125% of SWL
Height Of Lift
3 meters to 50 meters or as per customer requirements
IS Code
IS807, IS3177
Type
Single Girder
Locations
Indoor/Out door
End Carriages
The End Carriages are welded construction type and fabricated from plates or Std. section type constructions.
Bridge Girders
The girder is of plate fabricated box type construction design to sustain all stresses arising due to vertical & lateral forces with impact to which they are subjected. The maximum deflection of the main girder is limited to 1/750 the span of live loads including the weight of the trolley or hoist.
Platform
Two small length platform shall be provided
End Stopper
Steel end stoppers are provided on either side of the bring to limit the motion of the trolley. All the buffers will employ springs for shack absorption.
Steel
Steel confirming to IS-2062 or equivalent is used in the manufacturing of the main load bearing. (Mainly Essar or Sail make)
Wheel Base
As per span and IS code
L.T. Drive System
Twin drive type
Main-Hoisting
3.5 meter per minute (micro speed will be provided on demand)
L.T.
20 meters per minute (micro speed will be provided on demand)
C.T.
15 meters per minute (micro speed will be provided on demand)
Ele. Motors
All motors are off S-4 duty, Squirrel cage ,40% CDF,150 S/hr., IP -55 with Class F insulation or as per required class and duty
Brakes
Electro Hydraulic shoe type/ Electromagnetic Disc / Electromagnetic Shoe type brake shall be provided in Hoisting L.T. & C.T. These brakes are automatically released when the motor circuit is on and is applied the motor circuit is off
Wire Rope & No. ofaal
Selected as per crane capacity and IS Code he make of wire rope will be used Usha-martin
- Simple and optimum Design ensuring minimum dead weight, Wheel Load Headroom and easy to maintenance
- Easy to installation
- Reliable structure
- Higher efficiency to save power
- All motions are protected with Fail safe type brakes (which are applied when power supply is off and release when power supply is on.)
- All motions are protected with limit switches
- Rubber buffers are provided to extra protection against collision in case of limit switch failure
- Dustproof panel box with reputed make switch gear or as per customer’s approval
- 110 V Control voltage selected for protection of Crane operator against any electrical shock
- With electrical Interlocking to prevent simultaneous operation of opposite motion
- Using “C’ Rail / I Section type C.T. & Push button Festoon system it’s give long life and trouble free operation
- Unbreakable, Handy, light weight PVC Pushbutton
- Coupling less L.T. & C.T. Motion up to 7.5 Hp, (Less mechanism less maintenance)
- VFD in Long Travel Motion, Smooth Start & Stop (Maximize the life of Mechanism)
- Own Make Gearbox so which are easy to maintenance and we can provide any parts at any time from our stock
- Platform with hand railing for easy, simple & safe maintenance of the crane extended partially or totally along the girder width
- Radio Remote Control / Cabin Control
- Dual speed for all motion
- VFD in all motion
- Siren While Traveling a crane
- Load Cell with Display to weigh a Load or protection against overload
- Special Dimension Hook
- Other Reputed Brand Gearbox
- Drag Chain in Festoon system
- Protective Paints / Coating
- Over Lowering or over hoisting prevention limit switch
- Hook Safety Latch
- Overload Relays
- Travelling limit switch
- Rubber buffer
- Brakes in Hoisting as well as c.t & L.T.
- Main Switch
- On/ off switch in push button /Emergency stop
- MCB /fuse
- All 4 core cables with Earth cable
- Maintenance platform
- Siren in goliath crane
- Anti-collision device when more than one crane on same bay
Electric & Small parts are packed by high quality wooden crate to reduce distortion in conveying; Main beams, end carriages and electric hoist are packed by Wrapping of plastic roll It can reduce abrasion when transport.
- One to one service guarantees you the best purchasing experience.
- Strong production capacity and professional workmen guarantee you the short delivery.
- Strict delivery inspection guarantees you the high quality products.
- The short delivery time.
- One year warranty for Cranes
- Providing free quick-wear part
- Low charge for continue maintenance when warranty is expired
- Exclusive engineer support at any time.
- Highly professional training to end-users
